Avitech Rainier-4d Manual de usuario descargar pdf (Pagina 24)

Ref

Label / Component

Description



AUDIO IN-1 / 2

Each connector can include up to four analog stereo

pairs / AES audio inputs via proprietary DB26 to 16

BNC breakout cable.

NOTE: Refer to the next figure for the pin-out

assignments.



SDI OUT-1 / 2

BNC connector supports 3Gbps HD-SDI signal for

long distance output to monitor display.

NOTE: No video output from this port is possible when the

item Output Timing in Phoenix-Q program is set at

VESA.



Rotary dial to assign unique addresses in systems

with two or more units.



DIP switches

The left dip switch is for updating the firmware

while the right dip switch is for returning the Rainier

3G to the factory-default setting.

RS-232

RJ-45 connector for signal from the computer via

the proprietary RJ-45 to RS-232 (DB9-FM) cable.

Ethernet connector for using the computer’s

Phoenix-Q software to perform setup on the Rainier

3G.

GPIO

RJ-50 connector for GP input.

12V DC IN

Connects to the power adapter.

110~250V

Power jack for connecting the AC power cord.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 186 187

Sin comentarios

Avitech Rainier-4d Manual de usuario Pagina 24